AIKANJIA · CAMERA SOURCING
Indoor WiFi camera documents
Match the exact camera and configuration to the document before approving a purchase. The documents below were issued to Shenzhen Mingshun Technology Co., Ltd., not Aikanjia, and cover only the named small indoor WiFi camera models.
The RED document is a laboratory Verification of Compliance, not a notified-body certificate or an EU declaration of conformity. Its historical issue date does not establish conformity with later cybersecurity requirements. Solar, cellular and DC12V outdoor cameras are outside this document scope.
The RoHS report prints the applicant as Shenzhen Mingshunda Technology Co., LTD. This differs from the certificate holder. Request clarification before relying on the report for an order.
- Document
- Verification of Compliance (RED)
- Holder
- Shenzhen Mingshun Technology Co., Ltd.
- Issuer
- Rhenish-Lab Certification & Testing (Shenzhen) Co., Ltd.
- Number
- RLT2307021-01R1
- Standard
- EN IEC 62368-1:2020+A11:2020; ETSI EN 300 328 V2.2.2 (2019-07); ETSI EN 301 489-1 V2.2.3 (2019-11); ETSI EN 301 489-17 V3.2.4 (2020-09); EN IEC 62311:2020; EN 62479:2010
- Issued
- 24 August 2023
- Expires
- no expiry stated
- Models
- E27, E27-3, E27-AP, V8, Q7, Q7S, Q5, Q8, Q10Y, Q12, K6, X5, M6, M8, M18, M88, M68
- Markets
- EU
- Document
- Test report: emc
- Holder
- Shenzhen Mingshun Technology Co., Ltd.
- Issuer
- Rhenish-Lab Certification & Testing (Shenzhen) Co., Ltd.
- Number
- RLT2307021-04R1
- Standard
- ETSI EN 301 489-1 V2.2.3 (2019-11); ETSI EN 301 489-17 V3.2.4 (2020-09)
- Issued
- 24 August 2023
- Expires
- no expiry stated
- Models
- E27, E27-3, E27-AP, V8, Q7, Q7S, Q5, Q8, Q10Y, Q12, K6, X5, M6, M8, M18, M88, M68
- Markets
- EU
- Document
- Test report: radio
- Holder
- Shenzhen Mingshun Technology Co., Ltd.
- Issuer
- Rhenish-Lab Certification & Testing (Shenzhen) Co., Ltd.
- Number
- RLT2307021-05R1
- Standard
- ETSI EN 300 328 V2.2.2 (2019-07)
- Issued
- 24 August 2023
- Expires
- no expiry stated
- Models
- E27, E27-3, E27-AP, V8, Q7, Q7S, Q5, Q8, Q10Y, Q12, K6, X5, M6, M8, M18, M88, M68
- Markets
- EU
- Document
- Test report: safety
- Holder
- Shenzhen Mingshun Technology Co., Ltd.
- Issuer
- Rhenish-Lab Certification & Testing (Shenzhen) Co., Ltd.
- Number
- RLT2307021-06R1
- Standard
- EN IEC 62368-1:2020+A11:2020
- Issued
- 24 August 2023
- Expires
- no expiry stated
- Models
- E27, E27-3, E27-AP, V8, Q7, Q7S, Q5, Q8, Q10Y, Q12, K6, X5, M6, M8, M18, M88, M68
- Markets
- EU
- Document
- Test report: emf
- Holder
- Shenzhen Mingshun Technology Co., Ltd.
- Issuer
- Rhenish-Lab Certification & Testing (Shenzhen) Co., Ltd.
- Number
- RLT2307021-07R1
- Standard
- EN IEC 62311:2020
- Issued
- 24 August 2023
- Expires
- no expiry stated
- Models
- E27, E27-3, E27-AP, V8, Q7, Q7S, Q5, Q8, Q10Y, Q12, K6, X5, M6, M8, M18, M88, M68
- Markets
- EU
- Document
- Certificate of Compliance (RoHS)
- Holder
- Shenzhen Mingshun Technology Co., Ltd.
- Issuer
- Rhenish-Lab Certification & Testing (Shenzhen) Co., Ltd.
- Number
- RLT2307021-02R1
- Standard
- IEC 62321-4:2013+AMD1:2017; IEC 62321-5:2013; IEC 62321-6:2015; IEC 62321-7-1:2015; IEC 62321-7-2:2017; IEC 62321-8:2017; RoHS 2011/65/EU Annex II (EU) 2015/863, as amended by (EU) 2017/2102
- Issued
- 17 July 2023
- Expires
- no expiry stated
- Models
- E27, E27-3, E27-AP, V8, Q7, Q7S, Q5, Q8, Q10Y, Q12, K6, X5, M6, M8, M18, M88, M68
- Markets
- EU
- Document
- Test report: rohs
- Holder
- Shenzhen Mingshunda Technology Co., LTD
- Issuer
- Rhenish-Lab Certification & Testing (Shenzhen) Co., Ltd.
- Number
- RLT2307021-02R1
- Standard
- IEC 62321-4:2013+AMD1:2017; IEC 62321-5:2013; IEC 62321-6:2015; IEC 62321-7-1:2015; IEC 62321-7-2:2017; IEC 62321-8:2017; RoHS 2011/65/EU Annex II (EU) 2015/863, as amended by (EU) 2017/2102
- Issued
- 17 July 2023
- Expires
- no expiry stated
- Models
- E27, E27-3, E27-AP, V8, Q7, Q7S, Q5, Q8, Q10Y, Q12, K6, X5, M6, M8, M18, M88, M68
- Markets
- EU
Check the exact order
Ask for current model-specific test evidence, the applicable declaration, manufacturer identification and destination requirements. A matching model code alone does not prove that the supplied hardware and software match a tested build. Issuer authenticity and current validity have not been independently confirmed.